The ECMAScript standard has been updated yet again with the addition of new features in ES2019. Now officially available in node, Chrome, Firefox, and Safari you can also use Babel to compile these features to a different version of JavaScript if you need to support an older browser.
Let’s look at what’s new!
Object.fromEntries
In ES2017, we were introduced to Object.entries
. This was a function that translated an object into its array representation. Something like this:
let students = {
amelia: 20,
beatrice: 22,
cece: 20,
deirdre: 19,
eloise: 21
}
Object.entries(students)
// [
// [ 'amelia', 20 ],
// [ 'beatrice', 22 ],
// [ 'cece', 20 ],
// [ 'deirdre', 19 ],
// [ 'eloise', 21 ]
// ]
This was a wonderful addition because it allowed objects to make use of the numerous functions built into the Array prototype. Things like map
, filter
, reduce
, etc. Unfortunately, it required a somewhat manual process to turn that result back into an object.
let students = {
amelia: 20,
beatrice: 22,
cece: 20,
deirdre: 19,
eloise: 21
}
// convert to array in order to make use of .filter() function
let overTwentyOne = Object.entries(students).filter(([name, age]) => {
return age >= 21
}) // [ [ 'beatrice', 22 ], [ 'eloise', 21 ] ]
// turn multidimensional array back into an object
let DrinkingAgeStudents = {}
for (let [name, age] of DrinkingAgeStudents) {
DrinkingAgeStudents[name] = age;
}
// { beatrice: 22, eloise: 21 }
Object.fromEntries
is designed to remove that loop! It gives you much more concise code that invites you to make use of array prototype methods on objects.
let students = {
amelia: 20,
beatrice: 22,
cece: 20,
deirdre: 19,
eloise: 21
}
// convert to array in order to make use of .filter() function
let overTwentyOne = Object.entries(students).filter(([name, age]) => {
return age >= 21
}) // [ [ 'beatrice', 22 ], [ 'eloise', 21 ] ]
// turn multidimensional array back into an object
let DrinkingAgeStudents = Object.fromEntries(overTwentyOne);
// { beatrice: 22, eloise: 21 }
It is important to note that arrays and objects are different data structures for a reason. There are certain cases in which switching between the two will cause data loss. The example below of array elements that become duplicate object keys is one of them.
let students = [
[ 'amelia', 22 ],
[ 'beatrice', 22 ],
[ 'eloise', 21],
[ 'beatrice', 20 ]
]
let studentObj = Object.fromEntries(students);
// { amelia: 22, beatrice: 20, eloise: 21 }
// dropped first beatrice!
When using these functions make sure to be aware of the potential side effects.
Support for Object.fromEntries
Chrome | Firefox | Safari | Edge |
---|---|---|---|
75 | 67 | 12.1 | No |
🔍 We can use your help. Do you have access to testing these and other features in mobile browsers? Leave a comment with your results — we'll check them out and include them in the article.
Array.prototype.flat
Multi-dimensional arrays are a pretty common data structure to come across, especially when retrieving data. The ability to flatten it is necessary. It was always possible, but not exactly pretty.
Let’s take the following example where our map leaves us with a multi-dimensional array that we want to flatten.
let courses = [
{
subject: "math",
numberOfStudents: 3,
waitlistStudents: 2,
students: ['Janet', 'Martha', 'Bob', ['Phil', 'Candace']]
},
{
subject: "english",
numberOfStudents: 2,
students: ['Wilson', 'Taylor']
},
{
subject: "history",
numberOfStudents: 4,
students: ['Edith', 'Jacob', 'Peter', 'Betty']
}
]
let courseStudents = courses.map(course => course.students)
// [
// [ 'Janet', 'Martha', 'Bob', [ 'Phil', 'Candace' ] ],
// [ 'Wilson', 'Taylor' ],
// [ 'Edith', 'Jacob', 'Peter', 'Betty' ]
// ]
[].concat.apply([], courseStudents) // we're stuck doing something like this
In comes Array.prototype.flat
. It takes an optional argument of depth.
let courseStudents = [
[ 'Janet', 'Martha', 'Bob', [ 'Phil', 'Candace' ] ],
[ 'Wilson', 'Taylor' ],
[ 'Edith', 'Jacob', 'Peter', 'Betty' ]
]
let flattenOneLevel = courseStudents.flat(1)
console.log(flattenOneLevel)
// [
// 'Janet',
// 'Martha',
// 'Bob',
// [ 'Phil', 'Candace' ],
// 'Wilson',
// 'Taylor',
// 'Edith',
// 'Jacob',
// 'Peter',
// 'Betty'
// ]
let flattenTwoLevels = courseStudents.flat(2)
console.log(flattenTwoLevels)
// [
// 'Janet', 'Martha',
// 'Bob', 'Phil',
// 'Candace', 'Wilson',
// 'Taylor', 'Edith',
// 'Jacob', 'Peter',
// 'Betty'
// ]
Note that if no argument is given, the default depth is one. This is incredibly important because in our example that would not fully flatten the array.
let courseStudents = [
[ 'Janet', 'Martha', 'Bob', [ 'Phil', 'Candace' ] ],
[ 'Wilson', 'Taylor' ],
[ 'Edith', 'Jacob', 'Peter', 'Betty' ]
]
let defaultFlattened = courseStudents.flat()
console.log(defaultFlattened)
// [
// 'Janet',
// 'Martha',
// 'Bob',
// [ 'Phil', 'Candace' ],
// 'Wilson',
// 'Taylor',
// 'Edith',
// 'Jacob',
// 'Peter',
// 'Betty'
// ]
The justification for this decision is that the function is not greedy by default and requires explicit instructions to operate as such. For an unknown depth with the intention of fully flattening the array the argument of Infinity can be used.
let courseStudents = [
[ 'Janet', 'Martha', 'Bob', [ 'Phil', 'Candace' ] ],
[ 'Wilson', 'Taylor' ],
[ 'Edith', 'Jacob', 'Peter', 'Betty' ]
]
let alwaysFlattened = courseStudents.flat(Infinity)
console.log(alwaysFlattened)
// [
// 'Janet', 'Martha',
// 'Bob', 'Phil',
// 'Candace', 'Wilson',
// 'Taylor', 'Edith',
// 'Jacob', 'Peter',
// 'Betty'
// ]
As always, greedy operations should be used judiciously and are likely not a good choice if the depth of the array is truly unknown.
Support for Array.prototype.flat
Chrome | Firefox | Safari | Edge |
---|---|---|---|
75 | 67 | 12 | No |
Chrome Android | Firefox Android | iOS Safari | IE Mobile | Samsung Internet | Android Webview |
---|---|---|---|---|---|
75 | 67 | 12.1 | No | No | 67 |
Array.prototype.flatMap
With the addition of flat we also got the combined function of Array.prototype.flatMap
. We've actually already seen an example of where this would be useful above, but let's look at another one.
What about a situation where we want to insert elements into an array. Prior to the additions of ES2019, what would that look like?
let grades = [78, 62, 80, 64]
let curved = grades.map(grade => [grade, grade + 7])
// [ [ 78, 85 ], [ 62, 69 ], [ 80, 87 ], [ 64, 71 ] ]
let flatMapped = [].concat.apply([], curved) // now flatten, could use flat but that didn't exist before either
// [
// 78, 85, 62, 69,
// 80, 87, 64, 71
// ]
Now that we have Array.prototype.flat
we can improve this example slightly.
let grades = [78, 62, 80, 64]
let flatMapped = grades.map(grade => [grade, grade + 7]).flat()
// [
// 78, 85, 62, 69,
// 80, 87, 64, 71
// ]
But still, this is a relatively popular pattern, especially in functional programming. So having it built into the array prototype is great. With flatMap
we can do this:
let grades = [78, 62, 80, 64]
let flatMapped = grades.flatMap(grade => [grade, grade + 7]);
// [
// 78, 85, 62, 69,
// 80, 87, 64, 71
// ]
Now, remember that the default argument for Array.prototype.flat
is one. And flatMap
is the equivalent of combing map
and flat
with no argument. So flatMap
will only flatten one level.
let grades = [78, 62, 80, 64]
let flatMapped = grades.flatMap(grade => [grade, [grade + 7]]);
// [
// 78, [ 85 ],
// 62, [ 69 ],
// 80, [ 87 ],
// 64, [ 71 ]
// ]
Support for Array.prototype.flatMap
Chrome | Firefox | Safari | Edge |
---|---|---|---|
75 | 67 | 12 | No |
Chrome Android | Firefox Android | iOS Safari | IE Mobile | Samsung Internet | Android Webview |
---|---|---|---|---|---|
75 | 67 | 12.1 | No | No | 67 |
String.trimStart and String.trimEnd
Another nice addition in ES2019 is an alias that makes some string function names more explicit. Previously, String.trimRight
and String.trimLeft
were available.
let message = " Welcome to CS 101 "
message.trimRight()
// ' Welcome to CS 101'
message.trimLeft()
// 'Welcome to CS 101 '
message.trimRight().trimLeft()
// 'Welcome to CS 101'
These are great functions, but it was also beneficial to give them names that more aligned with their purpose. Removing starting space and ending space.
let message = " Welcome to CS 101 "
message.trimEnd()
// ' Welcome to CS 101'
message.trimStart()
// 'Welcome to CS 101 '
message.trimEnd().trimStart()
// 'Welcome to CS 101'
Support for String.trimStart and String.trimEnd
Chrome | Firefox | Safari | Edge |
---|---|---|---|
75 | 67 | 12 | No |
Optional catch binding
Another nice feature in ES2019 is making an argument in try-catch blocks optional. Previously, all catch blocks passed in the exception as a parameter. That meant that it was there even when the code inside the catch block ignored it.
try {
let parsed = JSON.parse(obj)
} catch(e) {
// ignore e, or use
console.log(obj)
}
This is no longer the case. If the exception is not used in the catch block, then nothing needs to be passed in at all.
try {
let parsed = JSON.parse(obj)
} catch {
console.log(obj)
}
This is a great option if you already know what the error is and are looking for what data triggered it.
Support for Optional Catch Binding
Chrome | Firefox | Safari | Edge |
---|---|---|---|
75 | 67 | 12 | No |
Function.toString() changes
ES2019 also brought changes to the way Function.toString()
operates. Previously, it stripped white space entirely.
function greeting() {
const name = 'CSS Tricks'
console.log(`hello from ${name}`)
}
greeting.toString()
//'function greeting() {\nconst name = \'CSS Tricks\'\nconsole.log(`hello from ${name} //`)\n}'
Now it reflects the true representation of the function in source code.
function greeting() {
const name = 'CSS Tricks'
console.log(`hello from ${name}`)
}
greeting.toString()
// 'function greeting() {\n' +
// " const name = 'CSS Tricks'\n" +
// ' console.log(`hello from ${name}`)\n' +
// '}'
This is mostly an internal change, but I can’t help but think this might also make the life easier of a blogger or two down the line.
Support for Function.toString
Chrome | Firefox | Safari | Edge |
---|---|---|---|
75 | 60 | 12 - Partial | 17 - Partial |
And there you have it! The main feature additions to ES2019.
There are also a handful of other additions that you may want to explore. Those include:
Happy JavaScript coding!
The post All the New ES2019 Tips and Tricks appeared first on CSS-Tricks.
from CSS-Tricks https://ift.tt/2ZZhkZJ
via IFTTT
No comments:
Post a Comment